Lake Erie Wind Turbine Project, ‘Icebreaker,’ Wins $5 Million in New Funding

Cleveland - The U.S. Department of Energy (DOE) announced today $5 million in new funding for Lake Erie Energy Development Corporation (LEEDCo), the non-profit corporation leading the effort for the first freshwater offshore wind project in the nation.

Through a one-year cooperative agreement, the DOE has committed $4 million to support the advancement of the offshore wind energy project known as "Icebreaker", which consists of five to nine wind turbines seven miles off the coast of Cleveland in Lake Erie. LEEDCo’s private partners committed an additional $1 million in cost share as part of the agreement.

"Icebreaker" is one of only seven offshore wind energy projects that DOE awarded funding today and the only one in the Great Lakes. The selected demonstration projects will help address key challenges associated with installing utility-scale offshore wind turbines, connecting offshore turbines to the power grid, and navigating new permitting and approval processes.

The DOE is making available up to $180 million over the next five years to help accelerate the deployment of breakthrough wind power technologies. "Icebreaker" could potentially receive an additional $46.7 million in federal funding.

"The United States has tremendous untapped clean energy resources, and it is important for us to develop technologies that will allow us to utilize those resources in ways that are economically viable," said U.S. Secretary of Energy Steven Chu. "Today’s announcement of awards to the first offshore wind projects in the U.S. paves the way to a cleaner, more sustainable and more diverse domestic energy portfolio that develops every source of American energy."

"The DOE funding for ‘Icebreaker’ is a testament and vote of confidence for LEEDCo’s world-class team members and partners," said LEEDCo President Dr. Lorry Wagner. "After a highly-competitive evaluation process, I am excited and proud to say that ‘Icebreaker’ was selected for its innovation and expertise in wind energy development, paving the way for future financial support from the Department of Energy and private investors."

Among LEEDCo’s winning development team for the project are Case Western Reserve University, McMahon DeGulis, Freshwater Wind, Siemens, and DNV KEMA. The strength of this team comes from combining international partners who have first-hand offshore wind experience with local partners who add value by possessing knowledge of the Lake Erie environment as well as the regional labor force.

For example, with the recently completed 1000 MW London Array, Siemens has now supplied the world’s largest, in addition to the world’s first, offshore projects. The company holds 80 percent of the offshore market share in Europe and recently contracted to deliver 300 of its new 6 MW turbines to leading offshore wind farm developer Dong Energy.

Locally, McMahon DeGulis’ expertise in renewable energy permitting helped LEEDCo to advance through the regulatory processes. CWRU has studied ice and wind data at the Cleveland water intake crib since 2005, and has received several grants for offshore wind research. DNV KEMA has conducted project certification and design verification for 44 offshore wind projects globally.

The elite team of LEEDCo partners recognizes the enormous opportunity with this new funding and is committed to making "Icebreaker" a catalyst for building the freshwater offshore wind industry in Ohio.

"With this funding, ‘Icebreaker’ will be a launch pad for offshore wind development in our region," said Dr. Wagner. "This significantly increases Ohio’s prospects for leveraging first mover advantage in the offshore wind industry, and that will translate into job creation and economic development for our state."

LEEDCo and its development team will compete among the seven DOE award winners announced today for the additional $46.7 million the DOE is making available. Three of these seven offshore wind energy projects will receive additional funding in the following four years.

Source: LEEDCo

Similar Entries

Only one year after the successful commissioning of Taiwan’s pioneering Formosa 1 Phase 1 offshore wind power plant, Siemens Gamesa Renewable Energy (SGRE) has been contracted to supply an additional 120 MW of capacity for Formosa 1 Phase 2. The contracts signed today are subject to the joint venture’s final investment decision and financial close, which are expected later this year. In addition to the turbine supply agreement, a 15-year Full service agreement is also signed and includes the provision of spare parts and tools to help ensure the reliability and optimal performance of the turbines. The installation of the 20 SWT-6.0-154 wind turbines will start in 2019. They will expand the total capacity of Formosa 1 wind power plant to 128 MW.

On Monday, April 30th the Taiwanese Ministry of Economy announced the award of 1 GW of grid connection capacity for the implementation of the offshore wind projects Yunlin and Guanyin to wpd. With the award of these projects developed by wpd during the last years, the company is meeting an important milestone of its strategy to expand its leading role for the energy transition of Taiwan. After more than ten years presence and together with partners, wpd reached a market share of about 50 percent in the onshore business. wpd will also stand in the frontline of the first offshore projects to be implemented.

Wind Handling equipment from SH Group

SH Group expands business areas to the offshore wind segment by using their already existing knowledge and competencies within their 20 years of operating in the oil and gas industry to seek new challenges and gain further market share.

Siemens Gamesa Renewable Energy has been selected by MidAmerican Energy Company to supply turbines for an upcoming wind farm. The company will supply 25 SWT-2.625-120 and 5 SWT-2.3-108 wind turbines, totalling 77 MW, with the option to add up to 5 additional SWT-2.625-120 wind turbines for a total capacity of 90 MW. The project is targeting commercial operation by December 2018. The blades will be manufactured at the Siemens Gamesa’s Fort Madison, Iowa facility, and the nacelles and hubs will be assembled at the Hutchinson, Kansas facility. The scope of this project also includes a 5-year service and maintenance agreement.