Fraunhofer ISE Pushes World Record for Multicrystalline Silicon Solar Cells to 22.3 Percent

25.09.2017

Research and industry worldwide are working to further reduce the costs of solar electricity and German research is playing a leading role. With its newest solar cell, the Fraunhofer Institute for Solar Energy Systems ISE has now exceeded its own world record for multicrystalline solar cells. The record cell converts 22.3 percent of the incident sunlight into electricity.

Multicrystalline silicon, the work horse of the photovoltaic industry, dominates the PV module production worldwide with a market share of 57 percent. In the last few years, the efficiencies of the more expensive monocrystalline solar cells have increased greatly, thus widening the gap between mono and multicrystalline material. At Fraunhofer ISE in Freiburg, the researchers have succeeded in decreasing this efficiency gap by surpassing their own world record efficiency for multicrystalline solar cells which they established just a few months ago. Pushing beyond the magical threshold of 22 percent, their newest solar cell converts 22.3 percent of the incident solar energy into electricity. The researchers affirm that the maximum potential of the material and the cell technology has not yet been realized.

The new record became possible through the use of highly pure silicon supplied by the project partner Wacker and also through adjustments that targeted the needs of the multicrystalline material in both the crystallization and the cell processing steps. An optimized plasma texture and a so-called “Tunnel Oxide Passivated Contact Technology (TOPCon),” developed at Fraunhofer ISE for back side contacting played an essential role.  With the TOPCon technology the electrical contacts are applied over the entire rear surface of the cell without patterning. This reduces charge-carrier losses and leads to much higher electrical efficiencies. “We are pleased to have succeeded in achieving such an excellent result,” remarks Martin Hermle, Department Head of Advanced Development of High-Efficiency Silicon Solar Cells at Fraunhofer ISE. Hermle adds: “The key to our success was the holistic approach which enabled us to optimize all steps, from the crystallization up to the individual solar cell fabrication processes. The close and continual cooperation between the characterization, crystallization and the solar cell technology research teams at ISE allowed us to reduce the loss mechanisms step by step and successfully develop an optimized process chain.” Division Director Prof. Stefan Glunz adds: “These successful results achieved in solar cell efficiency are based on steady, continuous development and demonstrate the strength of European research and innovation in this field. At the same time these advances lead the way for Europe’s entry into market production of the next generation technology on the global scale.”

This record was a achieved within the project “multiTOP“ which runs until March 2017 and is financed by the German Federal Ministry for Economic Affairs and Energy BMWi.

The new world record solar cell will be presented at the European Photovoltaic Solar Energy Conference (EUPVSEC) on September 28, 2017 in Amsterdam by Dr. Jan Benick in his talk “Approaching 22% Efficiency with Multicrystalline n-Type Silicon Solar Cells.”

Source: Fraunhofer ISE

Similar Entries

Multicrystalline world record solar cell made of n-type HPM silicon material (Photo: Fraunhofer ISE)

In all the commotion about falling module prices, the subject of cell efficiency is sometimes overlooked. Fraunhofer ISE, which is based in Freiburg, has put the topic back in the spotlight by announcing a new world record for efficiency with multicrystalline cells: 21.9 %.

Imec announced it has realized bifacial n-PERT solar cells using an industrially-compatible process with a record-setting front-side conversion efficiency of 22.8 %. Used bifacially under standard front illuminations conditions in conjunction with an additional 0.15 sun rear illumination, these cells can produce the equivalent energy of 26.2 % monofacial cells, as the  research and innovation hub in nano-electronics, energy and digital technology and partner in EnergyVille points out.

Silicor Materials, Inc., a manufacturer of high-quality solar silicon and aluminum by-products, announced today that in its first ever attempt, the company has produced p-type mono PERC (Passivated Emitter Rear Cell) cells at approximately 20 percent efficiency, using 100 percent of its standard silicon feedstock.

The Lower Saxon‘ Institute for Solar Energy Research Hamelin (ISFH) achieved a solar cell efficiency of 25 % in collaboration with the Institute of Electronic Materials and Devices (MBE) of the Leibniz Universität Hannover. This high efficiency was accomplished with passivating "poly-Si on oxide" contacts (POLO) for both polarities, which avoid the otherwise high recombination beneath the metal contacts.