Sun provides 70 % of hot water in blocks of flats

14.12.2017
Photos: Construtora Altti
Photos: Construtora Altti

Construtora AlttiMore than 3,500 solar water heating systems have been in operation at blocks of flats across Brazil’s ‘solar city’ Belo Horizonte. This figure, an estimate by organisations which were previously part of a business cluster called BH Solar, affirms the city’s exceptional status in Brazil and around the world.

Most of the solar systems have been installed on the roofs of high-rise buildings intended for the middle class and the wealthy. The photo shows two such structures. One flat has 4 bedrooms and extends over an entire floor, measuring 280 m². To provide the security that owners were looking for, recreational facilities, such as a swimming pool and a tennis court, have been set up inside the walls put up around the complex.

One local construction company with much experience of solar water heaters is Construtora Altti. According to CEO Alberto Viotti, the company had started using solar equipment for a block of flats as early as in 1998. The business supplying this first installation had been Enalter, a collector and tank manufacturer from the greater region of Belo Horizonte.

Initially, the innovative technology had been intended as a unique selling point for the luxury housing market. Viotti pointed out that electric shower heads commonly available at that time would have not provided the high level of comfort needed for luxury flats. A central water heating system could have offered the comfort desired by investors, but it would have used electricity, a particularly expensive energy source in the region, and led to high running costs. Solar thermal had been a good alternative for providing the necessary level of comfort at moderate prices.

Viotti said that another important success factor had been the existence of well-established local solar technology suppliers, which had been operating on the market since the early 1980s. They ensured the availability of high-quality products and maintenance services. According to Construtora Altti, a typical 100 m² collector field, like the one set up on each of the high-rise buildings in the photo above, costs around Brazilian Real (BRL) 115,000 or USD 35,500 today, including gas backup and installation. The payback period is said to be around 3 years. The specific costs are at 1,150 BRL/m² of installed collector area, a figure that includes storage tanks holding up to 7,000 litres (355 USD/m²).

The system, nearly 6 m² collector area per flat, meets up to 70 % of hot water demand throughout the year and the remainder is supplied by a gas heater. A gas boiler is used as a backup to the solar unit when it is raining.

Wherever possible, the blocks of flats built by Altti include a swimming pool in the common area. These pools used to have heat sources not connected to the solar thermal installations. Since this year, integrated solar thermal systems have been supplying heat to showers and pools instead, in order to make better use of space and create synergy between supply and demand.

More could be possible if the heating installation were integrated with the cooling one. However, space cooling is usually the responsibility of the flat’s owner, and the typical system being installed in these flats is a decentralised split air conditioning unit.

Regarding photovoltaic energy, Construtora Altti will start its first project this year in a building in Uberlândia, a city located 550 kilometres away from Belo Horizonte. As part of the business’s marketing strategy, a PV generator will be installed in the common area of the blocks.

Source: solarthermalword.com

This article was written by Leticia Sother, a freelance journalist based in Belo Horizonte. She has recently completed her bachelor’s degree in architecture.

Similar Entries

The solar-cooled headquarters of Agility, a logistics business based in Kuwait. The 234 m² of evacuated flat plate collectors which provide the building with energy can be seen behind it. (Photo: TVP)

Sorption chillers may still be a niche market, but Europe’s manufacturers reported rising demand for solar thermal cooling in Italy, Spain and the Middle East in 2017. Solar thermal numbers are on the rise because of three factors: the potential to reduce power consumption, including peak loads; the option to use natural refrigerants, such as water; and the ability to provide demand-responsive heating and cooling throughout the year.

First Solar, Inc. announced it has completed the sale of the 280 MW California Flats Solar Project in Monterey County, Calif., to global private asset manager Capital Dynamics. Terms of the deal were not disclosed.

Photo: Sintek

Sint SolarSeptember saw the commissioning of Ukraine’s largest solar thermal system. Its 252 flat plate units add up to 518 m² of gross collector area and supply heat to the showers and kitchens at Mariupol, a major trading port on the Sea of Azov, near the Black Sea. The renovation of the boiler building hasn’t been completed yet, so that the solar installation will only be fully operational next year.

The map shows the three existing SDH plants in Varese, Sansicario and Lodi (red circles). A fourth with a gross area of about 600 m² is expected to come online in 2020 to feed heat into Turin’s district network operated by the Iren Group utility (yellow cirle). (Source: Ambiente Italia)

Substantial solar resources and a generous incentive scheme called Conto Termico 2.0: Perfect conditions, it seems, for the widespread use of solar district heating. But barriers such as a low gas price and the concentration of district heating in a small part of Italy have so far limited deployment to a few installed systems.